PEEK Tubing

PEEK Tubing

Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone(PAEK) family, used in engineering applications It was originally introduced by Victrex PLC, then Imperial Chemical Industries (ICI) in the early 1980s

Description

Material Introduction:

Polyether Ether Ketone

Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone(PAEK) family, used in engineering applications. It was originally introduced by Victrex PLC, then Imperial Chemical Industries (ICI) in the early 1980s.

MATERIAL PERFORMANCE

PEEK Contains a lot of benzene ring in the molecular structure and show very superior comprehensive performance.
PEEK has a very strong γ Irradiated resistance, which is stronger than the radiation resistance of polystyrene, which is the best one among generic resin. It can be made into high-performance wiring that can still make good insulation capability when γ Irradiation is at doses of 1100Mrad. 

PEEK has excellent chemical resistance. In ordinary chemicals, it can be dissolved or damaged only by concentrated sulfuric acid; Its corrosion resistance is similar to those of steel and nickel.

PEEK has the best fatigue resistance among all resins.

PEEK is the plastic that strikes a balance between toughness and rigidity. Especially, it has an excellent fatigue resistance against alternating stress that is the most talented of all plastics, and it can be comparable with alloys.

PEEK and its composites will not be affected chemically by water and high-pressure steam. The products that are made from this material will maintain the outstanding characteristics in continuous use in high temperature and high pressure water.

PEEK has good stripping resistance; Therefore, it can be made into thin wires or electromagnetic wire coating, and it can be used in harsh conditions.

PEEK is a very stable polymer. The 1.45mm thick samples can achieve the highest standard of fire retardant without adding any fire retardant.

PEEK has outstanding sliding characteristics in all plastics; It is suitable for stringent requirements for low coefficient of friction and resistance to friction used. Especially, the self-lubricating properties of PEEK will be better if it is modified by carbon fiber and graphite mixed in the proportion of each of them.

PEEK has a higher glass transition temperature and melting point (334º C). It is one of the reasons that it can be a reliable application in the requirement of the heat. Its heat load variable-temperature can be 316º C, continuous use temperature is 260º C.

ManufacturingExperience:

Product
Dimension
01030721
3.15*2.65*86mm
01080301
1.28*0.98*1400mm
01080338
1.0*0.7*1200mm
01080339
0.73*0.6*1200mm
01080340
0.65*0.5*1200mm
01080341
2.8*2.4*250mm
03030163
3.15*2.65*106mm
For more information, please ask us freely.

ManufacturingProcess:
Extrusion, Tipping, Printing, Hole Drilling, Shape Form

 

Product consulting

Enove is an experienced Contract Manufacturer of Medical Tubing and Catheters,your ideal OEM Business Partner. If you have any questions about our company's products, services, or web pages, we accept your comments and Suggestions, and please fill in the form and press We will give you an answer as soon as possible. Or contact your customer service, or call a customer service hotline: 0086-513-80988080/79/78

*Name:
*Email:
Telephone:
*Company:
Country/Area:
Content:
Captcha: